S-S0
Seal and Groove Dimensions in Millimeters (mm) |
||||||||||||
Seal Height |
Seal Width |
Seal Diameter Range |
Material Thickness |
Seal & Groove Clearance |
Groove Height |
Groove Corner Radius |
Groove Width |
Spring Back Values (mm) |
Load Values N/mm circumference |
|||
SH |
SW |
SD |
ST |
SGS |
GH |
GR |
GW |
L |
T |
L |
T |
|
spring |
Sheet |
|||||||||||
01.57 (-0.05/+0.25) |
1.50 |
16 - 250 |
L/T |
0.15 |
0.15 |
1.25-1.35 |
0.35 |
2.10 |
0.08 |
0.06 |
92 |
205 |
02.39 (-0.05/+0.25) |
2.25 |
25 - 350 |
L/T |
0.25 |
0.20 |
1.90-2.00 |
0.50 |
3.20 |
0.13 |
0.10 |
162 |
314 |
03.18 (-0.08/+0.28) |
2.90 |
30 - 500 |
L/T |
0.38 |
0.30 |
2.55-2.65 |
0.75 |
4.25 |
0.15 |
0.13 |
162 |
305 |
03.96 (-0.08/+0.28) |
3.60 |
40 - 650 |
L/T |
0.41 |
0.40 |
3.20-3.30 |
1.25 |
5.20 |
0.20 |
0.17 |
213 |
315 |
04.78 (-0.10/+0.40) |
4.50 |
100 - 800 |
L/T |
0.51 |
0.45 |
3.85-4.00 |
1.25 |
6.30 |
0.30 |
0.21 |
255 |
417 |
06.35 (-0.10/+0.40) |
5.85 |
150 - 1600 |
L/T |
0.64 |
0.60 |
5.05-5.30 |
1.5 |
8.40 |
0.32 |
0.32 |
345 |
780 |
09.53 (-0.10/+0.50) |
8.70 |
350 - 3000 |
L/T |
0.97 |
0.75 |
7.60-8.00 |
1.5 |
12.50 |
0.45 |
0.35 |
435 |
710 |
12.70 (-0.10/+0.50) |
11.55 |
650 - 3000 |
L/T |
1.27 |
1.00 |
10.15-10.65 |
1.5 |
16.50 |
0.55 |
- |
505 |
- |
Note: Above given values are based on lab setup conditions especially the Load and Spring-Back values. Practically the values can differ based on the actual seal size, groove conditions, groove dimensions, surface finish and seal plating conditions.