V Shaped Metal O-Rings (W/O Spring) Made From Sheet - External Pressure
V-O
|
Seal and Groove Dimensions in Millimeters (mm) |
|||||||||
|
Seal Height |
Seal Width |
Seal Diameter Range |
Sheet Thickness |
Seal & Groove Clearance |
Groove Height |
Groove Corner Radius |
Groove Width |
Spring Back Values (mm) |
Load Values N/mm circumference |
|
SH |
SW |
SD |
ST |
SGS |
GH |
GR |
GW |
SB |
LO |
|
L |
|||||||||
|
02.39 (+/-0.05) |
2.65 |
30 - 350 |
0.25 |
0.15 |
1.90-2.00 |
0.50 |
2.10 |
0.30 |
22 |
|
03.18 (+/-0.08) |
3.50 |
45 - 550 |
0.38 |
0.20 |
2.55-2.65 |
0.75 |
4.20 |
0.30 |
24 |
|
03.96 (+/-0.08) |
4.35 |
70 - 700 |
0.41 |
0.25 |
3.20-3.30 |
1.25 |
5.20 |
0.38 |
24 |
|
04.78 (+/-0.10) |
5.25 |
80 - 850 |
0.51 |
0.30 |
3.85-4.00 |
1.25 |
6.20 |
0.55 |
30 |
|
06.35 (+/-0.10) |
7.00 |
150 - 1500 |
0.64 |
0.40 |
5.05-5.30 |
1.5 |
8.40 |
0.60 |
75 |
|
09.53 (+/-0.10) |
10.50 |
350 - 2000 |
0.97 |
0.60 |
7.60-8.00 |
1.5 |
12.40 |
0.90 |
45 |
|
12.70 (+/-0.13) |
14.00 |
650 - 3000 |
1.27 |
0.75 |
10.15-10.65 |
1.5 |
16.50 |
1.20 |
60 |
Note: Above given values are based on lab set0up conditions especially the Load and Spring-Back values. Practically the values can differ based on the actual seal size, groove conditions, groove dimensions, surface finish and seal plating conditions.